How to Calculate Food Cost per Dish (With a Real Example)
Learn how to calculate food cost per dish step by step: recipe by weight, yield, takeout packaging and a pricing formula, with a worked cheeseburger example.

If you don't know how to calculate food cost per dish, you're guessing at your margins every time you take an order. Plenty of small restaurants stay busy all week and still come up short at the end of the month, and the reason is usually hiding in a best seller priced for last year's ingredient costs.
Those costs haven't been sitting still. In R365's 2026 mid-year State of the Restaurant Industry report, which surveyed more than 420 operators, 87% said their food costs went up in the first half of 2026, and 78% expect them to keep rising through year end. Only 52% had raised menu prices to keep up. Restaurant Business also reports that average wholesale food prices are up 35% since before the pandemic.
This guide walks you through plate costing step by step, with a worked example and a simple process you can repeat every month.
What food cost per dish actually includes
Your plate cost is what you pay for everything that leaves the kitchen with that order: protein, sides, sauces, fryer oil, garnish, and for takeout or delivery, the packaging.
It does not include rent, payroll, or utilities. Those are fixed costs, and you look at them separately. Plate cost only tracks what you spend each time you sell one more unit.
From there you get the number every operator should know, your food cost percentage:
Food cost % = (plate cost ÷ menu price) × 100
For reference, National Restaurant Association figures cited by DoorDash put the average around 32% for both full-service and limited-service restaurants. That's a benchmark, not a rule. A pizzeria might run lower and a seafood spot higher. What matters is that you know your number and watch it.
How to calculate food cost per dish, step by step
Step 1: Write down the exact recipe, by weight
"A handful of fries" is not a recipe. Weigh each component once, exactly as your line plates it on a normal shift. If every cook portions differently, that's already a cost problem.
Step 2: Find the cost per ounce (or per unit) of each ingredient
Pull your supplier invoice and divide what you paid by how much you got.
Example: a 10 lb case of ground beef at $55 works out to $5.50 per pound, or about $0.34 per ounce.
Step 3: Adjust for yield (most people skip this)
Yield is what's left after trimming, peeling, cooking, or portioning. Potatoes get peeled, beef shrinks on the flat top, chicken comes with bones.
True cost per ounce = cost per ounce ÷ yield
If 10 lb of whole potatoes gives you 8 lb of usable product, your yield is 0.80. Every usable ounce now costs 25% more than the invoice suggests. Most quick plate-cost guides gloss over this, and it's exactly where margin disappears.
Step 4: Add the stuff nobody sees
Sauces, fryer oil, buns, napkins, sauce cups, and to-go containers. Each one looks like pennies. Across a few hundred orders a month, it's real money.
Step 5: Divide by your price and compare to your target
That's your food cost percentage. If it's well above your target, that dish needs attention.
Worked example: a classic cheeseburger with fries
Example numbers to show the method. Use the prices on your own invoices.
| Ingredient | Portion | Cost | Yield | Plate cost |
|---|---|---|---|---|
| Ground beef | 6 oz | $0.34/oz | 0.85 | $2.40 |
| Bun | 1 | $0.45 | 1.00 | $0.45 |
| Cheese | 1 slice | $0.30 | 1.00 | $0.30 |
| Lettuce, tomato, onion | 2 oz | $0.12/oz | 0.80 | $0.30 |
| Fries | 6 oz | $0.10/oz | 0.80 | $0.75 |
| Sauces and oil | — | — | — | $0.30 |
| Dine-in plate cost | $4.50 | |||
| To-go container and bag | 1 | $0.60 | — | $0.60 |
| Takeout plate cost | $5.10 |
At a $14.00 menu price:
- Dine-in: $4.50 ÷ $14.00 = 32.1%
- Takeout: $5.10 ÷ $14.00 = 36.4%
Same burger, same price, more than four points of margin gone to packaging alone. And that's before third-party fees. If the order comes through a delivery app charging a percentage of the ticket, your margin drops a lot further. We break that down in delivery app commissions explained.
How to price a dish from its cost
Once you know the plate cost and your target, the math is simple:
Suggested price = plate cost ÷ target food cost %
For the takeout burger at a 32% target: $5.10 ÷ 0.32 = $15.94. That's the floor if you want takeout to earn what dine-in does.
Treat that as a starting point. Then check it against:
- What similar spots nearby charge for something comparable.
- How much the item sells. A high-volume dish can run a slightly higher percentage if it still brings in strong dollars per plate.
- Clean, readable prices on the menu. $15.95 or $16 reads better than $15.94.
If the numbers say it's time for an increase, do it deliberately. Our guide on how to raise menu prices without losing customers covers how.
What to do when a dish costs too much
Raising the price isn't your only move. First check:
- Portioning. Is the line serving 7 oz when the spec says 6? A kitchen scale pays for itself fast.
- Yield. If you lose a lot in prep, try a different cut or put the trim to work in another dish like soups, sauces, or fillings.
- Suppliers. Get two or three quotes on the ingredients that drive the most cost.
- Sides. Sometimes the expensive part isn't the protein, it's what's next to it.
- Combos. Pairing a low-cost drink or side can lift the ticket and lower the food cost percentage of the whole order.
- The menu itself. If a dish sells slowly and earns little, it may not deserve a spot.
How often to recalculate (without losing your weekend)
With food costs still climbing, a practical rhythm looks like this:
- Monthly: recheck your top 5 to 10 sellers.
- Whenever a supplier raises a key ingredient: recost every dish that uses it.
- Quarterly: go through the full menu.
The math usually isn't the hard part. Updating the price everywhere is: the printed menu, the PDF, the website, Instagram. That hassle is why a lot of owners keep selling a dish at a price that stopped working months ago.
It helps to have a menu you can change in seconds. With Menymat, for example, your digital menu lives on its own link and you update it by texting a WhatsApp bot, something like "raise the cheeseburger to 16," and the new price shows up on the menu and on the orders that come in. When your numbers say adjust, adjusting takes a message, not an afternoon.
Quick plate-costing checklist
- [ ] Every dish has a written recipe by weight.
- [ ] I'm using this month's invoice prices, not memory.
- [ ] I applied yield to proteins, produce, and potatoes.
- [ ] I included sauces, oil, and extras.
- [ ] I calculated takeout cost separately, packaging included.
- [ ] I set a target food cost percentage for my concept.
- [ ] I flagged every dish above target.
- [ ] I scheduled a monthly check of my best sellers.
FAQ
What is a good food cost percentage for a restaurant?
It depends on your concept, but National Restaurant Association figures put the average around 32%. Set your own target and keep an eye on the dishes that drift above it.
Does plate cost include rent and labor?
No. Plate cost only covers what gets used when you sell the dish: ingredients, sauces, and packaging. Rent, payroll, and utilities are fixed costs you analyze separately.
How do I calculate ingredient yield?
Weigh the ingredient before and after prep or cooking. Divide the usable weight by the starting weight to get your yield, then divide your cost per ounce by that yield.
Should takeout cost more than dine-in?
That's your call, but calculate both costs separately. Packaging and third-party fees change your margin, so you should know what each channel actually earns.
How often should I recalculate food costs?
Check your best sellers monthly and the full menu quarterly. If a supplier raises the price of a key ingredient, recost the dishes that use it right away.